Answers are grounded in this paper and cite their sources.
This study investigates the thermohydraulic performance of Al 2 O 3 ‐water nanofluid in a three‐fluid tubular heat exchanger under turbulent flow conditions. Nanofluids were prepared with Al 2 O 3 nanoparticles at three volume fraction levels (1%, 2%, and 3%) in deionized water, and experiments were performed under Reynolds numbers ranging from 2500–10,000. The heat exchanger consists of three fluid streams: the hot fluid in the inner tube, the intermediate temperature fluid in the outer annulus, and the cold nanofluid in the inner annulus, with heat transfer occurring simultaneously from the hot and intermediate fluids to the cold nanofluid. Before applying nanofluids, initial experiments were conducted using pure water to validate the experimental facility. Four flow configurations—parallel, parallel‐counter, counter‐parallel, and counter‐flow—were tested, showing that the Nusselt number (Nu) increases with higher flow rates and nanoparticle concentrations. The highest enhancement in heat transfer was observed in pure water, where Nusselt number improvements of 95.31%, 71.83%, 63.04%, and 62.92% were obtained for the respective flow arrangements as the Reynolds number increased from 2500 to 10,000. An uncertainty analysis was also conducted, with maximum uncertainties found to be 2.65% for Reynolds number, 10.54% for Nusselt number, and 11.87% for friction factor at Re = 10,000.
No takes yet. Share an insight, caveat, or question.
Untisso et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: