Answers are grounded in this paper and cite their sources.
This study demonstrates the closed-form solutions for simulation of a braking temperature generation during inertia dynamometer tests of railroad wheels and brake discs subject to single and multiple uniform and non-uniform braking actions. These methods, compared to other techniques, have a higher level of flexibility and allow for a rapid (a matter of seconds) and accurate computer solution of related braking problems. Some factors which make the described models an efficient and reliable technique for prediction of surface temperatures are listed below: 1. An extensive mesh generation of subsurface layers and its treatment, which is typical for numerical techniques, has been alleviated as not contributing significantly for the analysis of surface temperatures. Instead, new models operate with effective volumes of wheel rim and brake disc. This approach requires much less computer memory and operation time than applications of conventional numerical analysis. Whole volumes of wheel rim and brake discs were considered as their respective maximum effective volumes.2. Investigated surface temperatures were represented by a sum of bulk temperatures, a measurable equivalent of which are temperatures immediately preceding a braking action, and incremental surface temperatures. This division has numerous implications, including simplified determination of accurate values of surf ace temperatures.3. A governing equation of braking heal balance in a series of braking events (a basis for determination of bulk temperatures) has been corrected for heat rejection during both braking and cooling. (Former models consider heat dissipation only during the cooling period.)4. Empirical coefficients of heat loss were determined for a variety of operating conditions and a number of friction materials.
No takes yet. Share an insight, caveat, or question.
V. Dunaevsky (1991) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: