Answers are grounded in this paper and cite their sources.
This article introduces a novel transition that utilizes a printed circuit board (PCB) to replace the traditional metal lid of the groove gap waveguide (GGW). An efficient conversion from the GGW to the reflection cavity, consisting of a plated-blind groove and a shorting back, is achieved using the wedge. The tapered wide-slot probe is positioned at the bottom of the PCB to couple the electric field and simultaneously convert the TE10 mode in the GGW to the quasi-TEM mode in the conductor-backed coplanar waveguide. The operational mechanism of the transition is investigated, the design procedure with good operability is proposed, and the key dimensions are analyzed. Additionally, a back-to-back transition prototype is developed and experimentally investigated. The prototype demonstrates an insertion loss of less than 2.05 dB in the Ka-band and a 50.5% 10-dB return loss fractional bandwidth. It should give prominence that the configuration of the transition offers a dedicated layer for peripheral circuit placement. This unique advantage can address the inconvenience of integrating peripheral circuits with the GGW and provide a viable solution to applying the GGW in more complex radio frequency modules or systems.
No takes yet. Share an insight, caveat, or question.
Tao et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: