Answers are grounded in this paper and cite their sources.
By rapid cooling from the melt, an amorphous phase has been obtained in palladium—silicon alloys containing 15 to 23 at.% Si. This phase is stable at room temperature and crystallization cannot be detected after one month at 250°C. With rates of heating greater than 20°C/min, rapid crystallization takes place at 400°C, with a heat release of approximately 1000 cal/mole. The electrical resistivity of an alloy containing 17 at.% Si at room temperature is 2.6 times that of the equilibrium alloy. The resistivity decreases linearly with decreasing temperature and is about 95% of the room-temperature value at 2°K. Various factors involved in the retention of amorphous phases in rapidly quenched liquid alloys are discussed.
No takes yet. Share an insight, caveat, or question.
Duwez et al. (1965) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: