Answers are grounded in this paper and cite their sources.
Argon ion sputter etching was applied to two types of commercially pure titanium (JIS: TP340 and 550) and a martensitic stainless steel (JIS: SUS420J2) specimens placed on a SUS304 stainless steel cathode disk, and a second sputter etching stage was carried out by placing these specimens on a tungsten or tantalum cathode disk. The first sputter etching formed cone-shaped protrusions with base diameters of about 3 µm on the titanium specimens and 20–30 µm on the SUS420J2 specimen, and the second sputter etching yielded fine ridge-shaped protrusions less than 1 µm thick on the cone-shaped protrusions. In addition, nanometer-scale fine stick-shaped protrusions were formed along the tops of the ridge-shaped protrusions. Thus, surfaces with multiscale protrusions were obtained by two-stage sputter etching using different cathode disks. The specimens with ridge-shaped protrusions ensured high absorptance of more than 96% of visible light.
No takes yet. Share an insight, caveat, or question.
Nakasa et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: