Answers are grounded in this paper and cite their sources.
The effect of the solubility of the annealing solvent on the performance of poly(3-hexylthiophene) (P3HT):C61-butyric acid methyl ester (PCBM) solar cells is studied. The short-circuit current ( J sc ) and the fill factor (FF) increase remarkably, regardless of the type of annealing solvent, whereas a reduction of the open-circuit voltage ( V oc ) (of 0.1−0.2 V) is observed after solvent annealing. Interestingly, both the value of J sc and the power conversion efficiency (PCE) are higher for the poor-solvent-annealed devices than for the good-solvent-annealed ones. A good solvent vapor induces better self-organization of P3HT than a poor solvent vapor. However, the exciton loss increases due to excessive phase separation. A study of the space-charge-limited current (SCLC) reveals no significant differences between the carrier mobilities of good- and poor-solvent-annealed devices. Furthermore, the measured photocurrent suggests that the space charges no longer limit the values of J sc and FF for all the solvent-annealed devices. These results indicate that the higher J sc and PCE values obtained for the poor-solvent-annealed devices can be attributed to the optimized phase separation of the active layers, which induces balanced carrier mobility and minimum exciton loss.
No takes yet. Share an insight, caveat, or question.
Park et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: