Answers are grounded in this paper and cite their sources.
Fabrication and annealing properties of MgO/CoFeB/MgO on its perpendicular magnetic anisotropy (PMA) were evaluated. The double CoFeB-MgO structure was formed by removing the capping Ta layer of the initial Ta/CoFeB/MgO structure, followed by a second MgO layer and a W capping layer deposition. A decrease in magnetization saturation ( M s ) due to the formation of a magnetic dead layer was recovered by annealing at over 250 °C, exceeding the initial M s values. From the CoFeB thickness dependency, 1.8 times higher interfacial anisotropy ( K i ) was obtained with a double CoFeB-MgO interface, thereby preserving perpendicular magnetic anisotropy (PMA) up to a CoFeB thickness of 1.7 nm. A PMA film with a thicker film thickness is advantageous to obtain a high thermal stability (Δ) for scaled non-volatile magnetic memory devices.
No takes yet. Share an insight, caveat, or question.
Kobayashi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: