Answers are grounded in this paper and cite their sources.
Copper concentrates account for approximately 80% of the global copper production. The predominant method for processing these concentrates is pyrometallurgy, primarily through high-temperature smelting. An alternative approach is hydrometallurgical processing, which involves leaching under moderate to high temperatures and/or high-pressure conditions; however, these requirements often lead to increased capital and processing costs. This work explores a third alternative: mechanochemical processing of copper concentrates. In this method, the combined application of intensive grinding and oxidative reagents enhances leaching kinetics, significantly reducing the overall leaching time. A series of mechanochemical tests were conducted using chalcopyrite samples sourced from both a single hand specimen and an industrial copper concentrate. The tests employed a ring mill under low-moisture conditions, combined with different oxidising agents to evaluate their effectiveness in copper extraction. Three types of oxidants were tested: ferric chloride (FeCl₃), ferric sulfate (Fe₂(SO₄)₃), and ferric sulfate combined with silver as a catalytic agent. These oxidants were applied at varying stoichiometric ratios. Among the tested conditions, the highest copper recovery (68%) was achieved using ferric chloride after 25 min of reactive grinding. Ferric sulfate with silver as a catalyst also demonstrated promising results, achieving a 58% copper recovery under the same grinding time. These results demonstrate the potential of mechanochemical processing as an alternative to other conventional leaching technologies for treating copper concentrates.
No takes yet. Share an insight, caveat, or question.
Verdugo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: