Answers are grounded in this paper and cite their sources.
Layers of powdery and granular materials were dried in an infrared dryer shown in Fig.1, under various conditions as follows and the experimental results weres summarized as in Table 1.Kinds of Materials UsedRiver SanStandard SandIron ParticleWood PowderPorcelain ClayExperimental ConditionsDiameter of LayerThickness of LayerAir TemperatureAir VelocityIntensity of Infrared ProjectedAverage Diameter(mm)0.74, 0.27, 0.140.13, 0.088, 0.073, 0.041, 0.022, 0.0090.74, 0.540.16Under 0.04315cm7-61mm5-35°C1.14-1.34m/sec4, 400-9.000kcal/m2hThe temperature distribution in the direction of depth, measured with a device shown in Fig. 2, was found to be important in the study relative to the conditions employed by the authors, as it had close relation with the characteristics of the falling rate drying, as shown in Figs.3, 4, 8 and 9.From the above results, it was concluded that the thermal conduction through the dried-up layer, located between the surface and the wet sublayer, would play an important part in the drying of said materials in the second falling rate period.
No takes yet. Share an insight, caveat, or question.
Yagi et al. (1957) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: