This is the authors' abstract. We don't add key points for this paper.
A pilot study was undertaken on the use of lignite-based bottom ash as a fine aggregate in structural grade concrete. Bottom ash is combined with portland cement, crushed limestone coarse aggregate, and water to produce concretes with a uniform slump of 100 mm (4 ± 1/4 in.). Four different mixes with cement contents ranging from 297 to 475 kg/m 3 (500 to 800 lb/yd 3 ) are utilized. The bottom ash concretes are studied for fresh properties, hardened characteristics, and long-term durability. The engineering characteristics of mixtures made with bottom ash are compared with those of conventional concretes in order to evaluate the effectiveness and suitability of bottom ash as a viable fine aggregate in portland cement-based mixtures. Laboratory test results conclude that the inclusion of bottom ash increases the demand for mixing water in obtaining the required workability. As a consequence, both fresh and hardened properties are impacted, particularly for mixtures of low cement content. When a water-reducing admixture is used, the engineering properties of bottom ash concretes are similar, and in most cases superior, to those of control concretes.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Ghafoori et al. (1996) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: