Answers are grounded in this paper and cite their sources.
In the study, a MEMS-based benzene gas sensor is presented, consisting of a quartz substrate, a thin-film WO(3) sensing layer, an integrated Pt micro-heater, and Pt interdigitated electrodes (IDEs). When benzene is present in the atmosphere, oxidation occurs on the heated WO(3) sensing layer. This causes a change in the electrical conductivity of the WO(3) film, and hence changes the resistance between the IDEs. The benzene concentration is then computed from the change in the measured resistance. A specific orientation of the WO(3) layer is obtained by optimizing the sputtering process parameters. It is found that the sensitivity of the gas sensor is optimized at a working temperature of 300 °C. At the optimal working temperature, the experimental results show that the sensor has a high degree of sensitivity (1.0 KΩ ppm(-1)), a low detection limit (0.2 ppm) and a rapid response time (35 s).
No takes yet. Share an insight, caveat, or question.
Ke et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: