Answers are grounded in this paper and cite their sources.
In this note, the influence of process parameters for adhesive bonding as a versatile approach for the sealing of polymer microfluidic chips is investigated. Specifically, a process chain comprising pre-processing, adhesive transfer as well as post-processing is presented and parameter recommendations are provided. As a device for adhesive transfer, a modified laminator is utilized which transfers thin layers of adhesive onto the chip surface, only via a silicone roll. Using this device and a high temperature (Tg > 100 °C) epoxy adhesive, adhesive layers in the range of 2–4 µm can be reproducibly transferred (CV < 4%). For best bonding results, it is recommended to provide 2.5 µm thin layers of adhesive in combination with a subsequent evacuation step at 10 mbar for 3 h. Further, it is proposed to integrate capture channels near large, featureless areas to compensate for variations in processing and thus prevent clogging of channels.
No takes yet. Share an insight, caveat, or question.
Riegger et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: