Answers are grounded in this paper and cite their sources.
The galvanostatic pulse plating of bulk Cu-Al alloy films from solutions of copper(I) in the 60.0-40.0 mole percent aluminum chloride-1-ethyl-3-methylimidazolium chloride room-temperature molten salt mixed with 45.4% (v/v) benzene was investigated at a demountable nickel rotating disk electrode by using pulse current, superimposed-pulse current, and reverse-pulse current methods. The resulting alloy films were characterized by using scanning electron microscopy and energy dispersive X-ray spectroscopy and were compared to those prepared with conventional dc plating methods. Generally, the as-deposited surface morphology was greatly improved and the chloride contamination was decreased in those alloy electrodeposits prepared by using periodic current waveforms. This was especially true for some reverse-pulse current plating experiments, which led to deposits with no detectable chloride contamination. Cu-Al electrodeposits with specular surfaces containing approximately 4% atomic fraction aluminum were obtained by using superimposed-pulse current plating in which the superimposed current was equal in magnitude to the limiting current for the reduction of copper(I). The use of 1% (w/w) methyl t -butyl ether as a leveling agent to improve the deposit surface morphology was also investigated.
No takes yet. Share an insight, caveat, or question.
Zhu et al. (2002) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: