Answers are grounded in this paper and cite their sources.
Ionic liquids, 1-butyl-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide and 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide with 0.7 M lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) or 0.5 M , were successfully tested as electrolytes for cathodes operating at elevated temperatures of . The electrolytes based on ionic liquids show good ionic conductivity (from to ) together with good electrochemical stability up to 5 V vs . The electrochemical stability of electrolytes based on ionic liquids against an aluminum current collector was comparable to a diethyl carbonate:ethylene carbonate (DEC:EC) 1 M electrolyte and even better when the electrolytes were tested with blank electrodes (only aluminum current collector, carbon black, and binder). In the first cycle the electrochemical testing of showed a slightly lower reversibility in ionic liquids when compared to a DEC:EC 1 M electrolyte; at higher cycles the reversibility and the obtained capacity were comparable to the one obtained in a DEC:EC 1 M electrolyte. All electrochemical results show that LiTFSI can be used as a salt in ionic liquid-based electrolytes. These properties allow their potential application in large-scale lithium-ion batteries with improved safety.
No takes yet. Share an insight, caveat, or question.
Nádherná et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: