This is the authors' abstract. We don't add key points for this paper.
Two different silane agents including 3-aminopropyltriethoxysiane and tetraethyl orthosilicate are used to achieve MXene nanosheets grafted with amino-silane (Silane@MXene) and MXene nanosheets covered with SiO 2 nanoparticles (SiO 2 @MXene), respectively. The Silane@MXene and SiO 2 @MXene are used as nanofillers in a solvent-based epoxy coating and applied with a dry film thickness of 200 ± 50 μm on steel substrates. The neat epoxy and epoxy loaded with SiO 2 @MXene and Silane@MXene show water contact angles of 75.8°, 88.4°, and 115.8° and adhesion strengths of 3.2, 4.8, and 6 MPa, respectively. The neat sample fails after 28 days of immersion in the 3.5 wt% NaCl solution, while the coatings loaded with SiO 2 @MXene and Silane@MXene show low frequency impedance modulus of 4.34 × 10 7 and 2.97 × 10 8 Ω.cm 2 after 56 days of immersion, respectively. Moreover, density functional theory calculations indicate that both APTES and TEOS structures exhibit reactivity and promise for interacting with the MXene/solution interface. Molecular dynamics simulation shows that both Silane@MXene and SiO 2 @MXene are effective in protecting against the 3.5 wt% NaCl solution. The diffusion of Na + and Cl − in Silane@MXene is marginally higher compared to the SiO 2 @MXene systems. The exceptional adsorption capacity of the Silane@MXene makes it a suitable material for protection against NaCl solution.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Pourhashem et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: