This is the authors' abstract. We don't add key points for this paper.
Mach-Zehnder interferometer thermooptic switches were made using a thin-silicon-on-insulator material system. The switches use single-mode strip-Si waveguides, 0.26×0.4 μm, operating at 1.5 μm. The waveguides were heated directly by passing current through them, resulting in switching power of 6 mW, and a rise time of 0.6 μs. By heating both arms of the interferometer differentially, so one arm is cooling while the other heating, the switching-signal input power is reduced to <100 μW. In this differential mode, the switching time can be decreased to 50 ns by pulsing the electrical input to 10 mW. Modeling indicates 10-ns-switching time would require /spl sim/23 mW of pulsed power.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Geis et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: