Answers are grounded in this paper and cite their sources.
Ni–Fe–W alloys were obtained by electroplating using an ammoniacal citrate bath with a cation exchange membrane cell. The addition of 8 atom % iron to the Ni–W alloy removed surface microcracks on the deposits and increased the iron content, which was paralleled by an apparent increase in the tungsten content. To improve the microhardness, deposits were heat-treated at various temperatures. The maximum Vickers hardness value of 1350 was obtained after heat-treatment at . X-ray diffraction analysis revealed that the increasing annealing temperature induced both grain growth and precipitation of new phases, especially . Transmission electron microscopy and selected area diffraction observations revealed that annealing at led to a significant hardening of the deposits due to the precipitation of new phases with nanosized grains. However, as the annealing temperature was increased above , the microhardness began to fall with increasing grain size.
No takes yet. Share an insight, caveat, or question.
Mun et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: