This is the authors' abstract. We don't add key points for this paper.
Lasers used for space communication, lidar, and laser detection in space-air-ground integration applications typically use a traditional 1550 nm band tunable distributed-feedback Bragg (DFB) semiconductor laser. This has low output power, complex fabrication process, and high fabrication cost. In this paper, we present a gain-coupled surface grating-based 1550 nm DFB semiconductor laser that can be fabricated without the use of secondary epitaxial growth techniques or high-precision lithography. The periodic electrical injection is used to achieve a gain coupling effect. A tapered waveguide is added to achieve a high output power, and the use of AlGaInAs multiple quantum wells in the active region reduces the linewidth of the laser. A continuous-wave (CW)output power of 401.5 mW is achieved at 20 °C, the maximum side mode rejection ratio exceeds 55 dB, the measured 3 dB linewidth is 18.86 MHz, and the stable single-mode output with a quasi-continuous tuning range of 6.156 nm near 1550 nm from 10 °C to 50 °C. This simple preparation method, low cost, excellent performance, and stable tunable laser have extremely high commercial value in applications such as space communication, lidar, and laser detection.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Li et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: