Answers are grounded in this paper and cite their sources.
Epoxy resins (bisphenol A type epoxy resins/2‐ethyl‐4‐methylimidazole) consisting of oligomers with different molecular weights were foamed using a temperature‐quench physical foaming method with CO 2 . The resulting cell morphologies could be classified into four types: non‐foamed structure, cracked structure, star‐shaped structure, and sphere‐shaped structure. The effects of the gel fraction and molecular weight between crosslinks ( M C ) on the cell morphology were investigated for the preparation of microcellular epoxy foams. M C was calculated by measuring the plateau rubber modulus of the rheological properties and the weight uptake of acetone. By varying the molecular weight of the epoxy oligomers and the cure time, the M C of the epoxy was controlled to modulate the cell morphology. The experiments elucidated the threshold M C value that permits CO 2 ‐bubble nucleation: CO 2 ‐bubble nucleation in the epoxy resin could be induced when the distance between the crosslinking points exceeded the critical size of bubble nucleus. Based on this information, the microcellular epoxy foam was prepared by maintaining M C above 10 4 g mol −1 and the complex modulus above 6 × 10 8 Pa.
No takes yet. Share an insight, caveat, or question.
Ito et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: