Answers are grounded in this paper and cite their sources.
A ultra high frequency (UHF)-band high sensitivity voltage multiplier was designed based on Cobalt-Salicide (CoSi2)-Silicon Schottky diodes fabricated in scaled-down 0.18 mum CMOS technology. With low sheet resistance of optimized CoSi2-Si Schottky diode, the voltage multiplier using the diode resulted in superior power sensitivity compared to low-threshold (VTH) metal oxide semiconductor field effect transistors. Various multipliers with different diode sizes were fabricated and their sensitivities were compared. Under the operating current level of radio frequency identification (RFID) tag chips ( ~ muA), the voltage multipliers possessing smaller diodes showed better sensitivity due to higherQ-factor. An optimized five-stage voltage multiplier required an input power of - 19.5 dBm for a 1.2 V output voltage at 900 MHz. The measured sensitivity is the lowest for any UHF-band multiplier for passive RFID tag chips. This result based on scaled-down CMOS technology provides increased RFID operation range as well as higher processing power at lower power consumption.
No takes yet. Share an insight, caveat, or question.
Lee et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: