Experimental study of the friction and wear behaviour of a polymer disc/primer coating combination used in ball‐joints by means of large‐scale testing

The surfaces of a heavily loaded ball‐joint were initially covered with a sliding spray, and suffer wear. A solution is found by incorporating ultra high molecular weight polyethylene (UHMWPE) discs with a carbon fibre/epoxy reinforced ring as sliding material into the chairs of the structure. The ball side is covered with a zinc phosphate primer coating. For design purposes the local static and dynamic behaviour of the hybrid UHMWPE discs in contact with steel or Zn‐coated counterfaces should be large‐scale tested in terms of their loading capacity, low friction and wear resistance. Also the influence of creep and wear on friction is examined. After the large‐scale verification tests in laboratory, a good correlation is found with a test in the field.