Answers are grounded in this paper and cite their sources.
We achieved extremely-high-density steady state carrier injection and transport at over ∼10000A∕cm2 into organic thin films using high thermally conductive substrates, which suppress the temperature rise inside the devices by transferring the joule heat into the substrates. Using a silicon substrate with a high thermal conductivity of 148W∕mK and a small size cathode with a radius of r=25μm, we achieved a maximum current density of Jmax=12222A∕cm2 and power density of Pmax∼105W∕cm2 in an ITO(110nm)∕copperphthalocyanine (CuPc) (25nm)∕MgAg(100nm)∕Ag(10nm) device during a fraction of a second under direct current sweep. Further, we also achieved Jmax=514A∕cm2 in a conventional organic light-emitting diode structure using the same techniques. In the CuPc based devices, we observed characteristic current density (J)–voltage (V) behavior, indicating that the J–V characteristics are controlled by the trap-free space-charge-limited currents in the high current region, and by the trapped-charge-limited current in the low current region.
No takes yet. Share an insight, caveat, or question.
Yamamoto et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: