Answers are grounded in this paper and cite their sources.
In this paper, the two-way shape memory effect (TWSME) in a Ti–54.5 Ni(wt%) alloy was investigated experimentally to develop a NiTi linear actuator. The two-way shape memory effect was induced through a compressive shape memory cycle comprising four steps: (1) loading to maximum deformation; (2) unloading; (3) heating; and (4) cooling. Six types of specimen (one solid cylindrical and five tubular) were used to obtain the two-way shape memory strain and two-way recovery stress and to evaluate the actuating capacity. The two-way actuating strain showed a saturated tendency after several training cycles for the same maximum deformation. A maximum value of the two-way strain was obtained for 7% of maximum deformation, independently of the geometry of the tubular specimens. The two-way strains obtained by the shape memory cycles and two-way recovery stress linearly increase as a function of the maximum deformation and the two-way strain, respectively, and the geometry of specimen affects the two-way recovery stress. Although the results show that sufficient recovery stress can be generated by either the two-way shape memory process or by the one-way shape memory process, the two-way shape memory process can be applied more conveniently to actuating applications.
No takes yet. Share an insight, caveat, or question.
Yoo et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: