This is the authors' abstract. We don't add key points for this paper.
This study evaluated the effects on freeze–thaw resistance of steam curing, delay period, and subsequent curing, which are manufacturing conditions for precast concrete, and also examined the contributing factors of capillary permeability and pore structure. Specimens prepared for this study were steam-cured with delay periods set before and after the initial setting time of the concrete and after its final setting time, and they were subsequently subjected to water curing or air curing. The results show that steam curing coarsened voids and reduced freeze–thaw resistance. The delay period affected the number, distribution, and morphology of air voids at the placement surface. Furthermore, when the delay period was before the initial setting time, many large-diameter pores were distributed throughout the specimen, increasing capillary permeability. However, when the delay period was after the final setting time, the concrete densified and capillary permeability decreased, thereby improving freeze–thaw resistance. For subsequent curing, air curing resulted in higher freeze–thaw resistance than water curing, and we conjecture that this was related to water absorption in the concrete during the freeze–thaw test. • The freeze-thaw resistance of precast concrete decreases depending on the delay period and subsequent curing. • The delay period affects the number, distribution, and morphology of air voids at the placement surface. • To improve freeze-thaw resistance, it is better to set the delay period after the final setting time.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Ogata et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: