Answers are grounded in this paper and cite their sources.
Flexible pressure sensors demonstrate promising potential in human–machine interfaces, wearable devices, and implantable electronics. In this study, a highly sensitive pressure sensor was developed, comprising a polyimide substrate with a high-density micropyramid array (HD-μPA), an active piezoelectric component of poly(vinylidenefluoride- co -trifluoroethylene) [P(VDF-TrFE)]/barium titanate (BTO) nanofiber mat, and silver nanowires (AgNWs) as the top electrode. A mold for imprinting of polyimide HD-μPA was fabricated by an ultraprecision microgroove fly cutting process, which can obtain μPA with a higher density than the mold fabricated by anisotropic wet etching of silicon. The piezoelectric output of the HD-μPA-based pressure sensor was approximately 1.7 times higher than that of the sensor with a flat substrate. The improved sensitivity of the sensor was attributed to the stress concentration effect of HD-μPA and elastic modulus mismatch between the polyimide HD-μPA and the P(VDF-TrFE)/BTO nanofiber mat. A pressure detection limit as low as 0.6 Pa was achieved for the HD-μPA-based pressure sensor, showing many potential applications in flexible electronics.
No takes yet. Share an insight, caveat, or question.
Hu et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: