Answers are grounded in this paper and cite their sources.
Ferrite–silicate zinc leach residues are notoriously difficult to process hydrometallurgically—largely because ZnFe 2 O 4 remains stable even under aggressive sulfuric acid conditions. This work presents, for the first time, a systematic study of hydrazine (N 2 H 4 ) as a selective reductant for treating zinc cake generated at the Almalyk Mining and Metallurgical Complex (AMMC), Uzbekistan. Thermodynamic calculations over 25–120 °C confirmed that hydrazine readily reduces Fe(III) to Fe(II) within the ferrite lattice: Δ G ° values reached −860.8 and −608.7 kJ mol −1 for zinc and copper ferrites at 25 °C, and became more negative as the temperature rose. This Fe(III) → Fe(II) conversion disrupts the spinel structure, rendering it soluble in dilute H 2 SO 4 . Four leaching variables—acid concentration, hydrazine dosage, temperature, and time—were systematically evaluated using central composite design (CCD) coupled with response surface methodology (RSM). All four fitted models showed R 2 > 0.98 and p < 0.05, with temperature and hydrazine consumption identified as the dominant factors for Zn recovery. Under the RSM-derived optimum (1.0 M H 2 SO 4 , 6.3 wt.% N 2 H 4 , 85 °C, 2 h), extract ion efficiencies of 91.7% Zn, 98.1% Cu, 91.2% Cd, and 85.6% Fe were achieved experimentally, alongside a 55–60% reduction in solid residue mass. Post-leach X-ray diffraction (XRD) showed that readily soluble zinc phases were almost fully consumed, whereas anglesite (PbSO 4 ), willemite (Zn 2 SiO 4 ), and residual ZnFe 2 O 4 survived selectively in the solid. High-resolution TEM and STEM-EDS analyses revealed dramatic particle fragmentation: the original ~74 µm feed agglomerates broke down to 0.9–2.0 µm fragments through preferential dissolution along ferrite–silicate grain boundaries. Importantly, hydrazine oxidized cleanly to N 2 and H 2 O only—no CO 2 or problematic solid byproducts were detected. Residual hydrazine in process effluents was neutralized below regulatory discharge limits (< 0.01 mg L −1 ) by H 2 O 2 treatment. Taken together, these results establish hydrazine-assisted reductive leaching as a thermodynamically grounded, statistically optimized, and environmentally viable route for recovering valuable metals from zinc metallurgical waste. Zinc cake valorization: Decomposition of ZnFe 2 O 4 using hydrazine, process optimization by RSM, and residue analysis
No takes yet. Share an insight, caveat, or question.
Rakhmataliev et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: