Answers are grounded in this paper and cite their sources.
The aims of this study were to calibrate the collection depth for RMS and, using the calibration, to evaluate the in‐depth phase transformation induced in a dental 3 Y ‐ TZP ceramic by hydrothermal aging, simulating LTD . Objectives 10x and 80x affording spatial resolutions of ~3 and ~1 μm, respectively, were used. Probe size was controlled by the confocal pinhole aperture. The collection depth of each probe (objective – pinhole combination) was calibrated on a wedge‐shaped pure tetragonal zirconia specimen. Pure tetragonal samples of a dental 3 Y ‐ TZP were aged in vitro in an autoclave, in Ringer solution, at 130°C, under 0.6 MPa, for 10, 15, 20, 25, and 90 h. Two specimens were used for each time interval and two unexposed specimens served as controls. Monoclinic volume fraction ( V fm ) was determined by X‐ray diffraction and by in‐depth probing with RCMS . Probes based on 10x objective penetrated up to 68 μm, whereas those based on the 80x were limited to 5 μm. Aging induced significant increase in V fm , ranging from 30% after 10 h to 80% after 90 h. After 90 h aging, the 80% V fm extended to at least 20 μm from the surface. A maximum V fm was identified at 2.5 μm subsurface depth in 10, 15, and 20 h aged specimens.
No takes yet. Share an insight, caveat, or question.
Wulfman et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: