Answers are grounded in this paper and cite their sources.
Paper substrate organic solar cells are susceptible to degradation during ambient use and storage. An effective and low cost encapsulation is desirable. MoO3and UV-curing epoxy layers are compared as possible encapsulation options for P3HT:PCBM bulk heterojunction solar cells on paper substrates. Two encapsulation structures are explored – encapsulation on top of device and top & bottom of device. The shelf-life studies as per the widely accepted ISOS-D-1 protocol shows that epoxy layers are superior to MoO3layers as encapsulants. Most MoO3encapsulated devices degrade below 80% of the initial efficiency values within 24 hours of shelf storage; and the top & bottom encapsulation devices fare worse than top encapsulation devices. On the other hand, epoxy encapsulation allows for more than 500 h of shelf-life for the devices studied, which typically retain nearly 90% of initial efficiencies. The shelf-life stability of top and double encapsulation devices are found to be similar.
No takes yet. Share an insight, caveat, or question.
Balasubramanian et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: