A novel disposable pulsatile blood pump for cardiopulmonary bypass delivered higher pulsatile hydraulic power than a standard roller pump in an in vitro simulation.
Answers are grounded in this paper and cite their sources.
Supports development of pulsatile CPB pumps; leaves open whether higher PHP improves clinical outcomes.
There is unquestionable clinical evidence that pulsatile flow improves the quality of extracorporeal perfusion. A newly conceived pulsatile blood pump, for cardiopulmonary bypass (CPB) use, is presented in this abstract. Its relevant features are intended to overcome the factors that today limit the use of pulsatile blood pumps, which are mainly the complexity and costs of the devices. The study of the device included solid CAD and computational, coupled analyses of the fluid (blood side) and the solid domains (pumping diaphragm and valves), by means of a fluid-structure interaction approach. Optimization of the geometry of the device as well as the pumping membrane behavior has been sought. After computational analysis, a prototype of the device was built in order to perform hydraulic tests. The experimental analysis was performed with the aim of validating numerical results as well as verifying the new device's pumping behavior. Very good agreement was found between the computed predictions and the experiments in terms of valves' pressure drop and the diaphragm's pumping behavior. This depicts the adopted method as a powerful design approach which abates the costs usually required by the classical trial-and-error design criterion, based on repetitive prtotyping and massive in vitro test campaigns. Functional evaluation of the pump was carried out by using the device in a circuit where an adult patient's systemic circulation was simulated by a mock loop and the extracorporeal circuit was reproduced by means of standard CPB components. A roller pump used in pulsatile mode (RP-PM) was used for comparison. The pulsatile hydraulic power (PHP) delivered to the patient was ∼15 mW PHP for the RP-PM. The new pump proved to be able to deliver up to 40 mW PHP, thus providing a more physiological condition, closer to the PHP of the natural heart (90–140 mW).
No takes yet. Share an insight, caveat, or question.
Redaelli et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: