Answers are grounded in this paper and cite their sources.
We report on the application of Si and Al ion-implantation patterning to the fabrication of low-loss microwave transmission lines in high-temperature superconductor (HTS) thin films. Using this technique, we have fabricated coplanar waveguide (CPW) transmission lines in YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// (YBCO) thin films deposited on LaAlO/sub 3/ substrates. We have used both resonant and broadband measurements in order to characterize the performance of the resulting transmission line structures. For the broadband measurements, on-wafer calibrations were used to obtain accurate S-parameters and transmission line propagation constants up to 25 GHz. The propagation constants of the ion-implanted transmission lines do not differ significantly from those of lines patterned using conventional ion milling over the frequency range studied, with a value for the attenuation constant of approximately 0.03-0.04 dB/cm at 50 K and 10 GHz. The relatively low losses of the ion-implanted devices demonstrate the effectiveness of this method of patterning for HTS microwave device fabrication.
No takes yet. Share an insight, caveat, or question.
Booth et al. (1997) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: