Answers are grounded in this paper and cite their sources.
This work aims to evaluate the feasibility of an integrated additive manufacturing-incremental forming (IAMIF) technique to fabricate AA6061-T6/PLA composite laminates. The process integrates fused deposition modeling (FDM) as an additive mean and single-point incremental forming (SPIF) process as a forming mean to fabricate functional 3D models of metal/polymer composite laminate. The study investigates the effect of three process parameters— step down(0.3 mm, 0.6 mm), wall angle(20 0 ,30 0 ,40 0 ), and PLA layer thickness(0.4mm,0.8mm)—on the average wall spring-back(AWSB), thinning ratio ( ) of AA6061-T6/PLA composite laminates and hardness of PLA and AA6061sheets as well as Interfacial Adhesion(Gc). The results show that as the step-down increases, the AWSB, the and the hardness of PLA sheets also increase in contrast to AA6061sheets as well as Interfacial Adhesion(Gc). Further, an increase in wall angle led to an increase in , AWSB, AA6061sheets and Interfacial Adhesion(Gc) but had no effect on PLA hardness. Moreover, the PLA layer thickness interaction with step down positively influenced Interfacial Adhesion(Gc), with slight improvement in Gc as it increases at 0.3mm step down in contrast to 0.6mm step down. The results proved the feasibility of IAMIF process more deeply, through successful manufacturing a scaled blade of agricultural drone propeller as proof-of-concept. The proposed IAMIF approach presented herein offers a sustainable mass customization approach that benefit many industries that utilize composite laminates for manufacturing components of various sizes, including, but not limited to the automobile, renewable energy industry and the scientific industry
No takes yet. Share an insight, caveat, or question.
Abdelall et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: