The electrical breakdown characteristics of oil-paper insulation under steep front impulse voltages

Disconnecting switch operations in gas insulated equipment cause transient voltages with risetimes as steep as 5 to 20 nanoseconds and magnitudes as high as 2.5 pu. There is very little information on the effect of these transients on oil-paper insulated equipment. There have been reports, however of transformer and bushing failures caused by these transients. The electrical breakdown characteristics of oil-paper insulation under steep front impulse were studied in this project, which was co-sponsored by the Canadian Electrical Association and BC Hydro. V/sub 50/ (50% breakdown probability voltage) breakdown data was obtained with steep front (10 ns/2500 /spl mu/s), lightning and switching impulse waveforms. Insulation breakdown voltage vs breakdown time (V-t) data and multiple impulse breakdown data were obtained with the steep front impulse waveform. The V/sub 50/ results showed that the breakdown strengths were lower for steep front impulses than for lightning impulses. The multiple impulse breakdown results showed that oil-paper insulation breakdown strength can be lower than 100 kV/mm. These results are alarming, since they suggest that oil-paper insulated equipment subjected to steep front transients will fail at voltages below the lightning impulse design level (BIL). The volt-time data had a discontinuity. The breakdown process at risetimes below about 50 ns was different from the breakdown process at risetimes above 50 ns.>