Answers are grounded in this paper and cite their sources.
Boron carbide (10 wt%) and fly ash (5 wt%) particles are reinforced in AA336 aluminium alloy by stir casting process. Microstructure of samples are investigated and dry sliding wear factors viz., load (10 N–50 N), sliding distance (500 m–2500 m) and sliding velocity (1 ms −1 –5 ms −1 ) are considered. Response surface methodology is used to design the experiments and wear weight loss of samples is measured. Regression equation is developed to predict the weight loss. Analysis of variance, significance test and confirmation test are used to find the significant wear parameters which affects the weight loss and the wear factors are optimized for obtaining lowest weight loss. Microstructure of samples showed uniform dispersion of particles in AA336 aluminium alloy. Wear test results showed that weight loss increased with increasing load and sliding distance. However, weight loss of samples decreased with increasing sliding velocity. Optimum dry sliding wear factors are found to be a load of 18.1 N, sliding distance of 905.4 m with a sliding velocity of 4.18 ms −1 .
No takes yet. Share an insight, caveat, or question.
Arunachalam et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: