Answers are grounded in this paper and cite their sources.
Highly flexible, biocompatible, large-scale production of BaTiO 3 nanocube (BTO NC)/poly(dimethylsiloxane) (PDMS) composite films (CFs) prepared via a simple, cost-effective solution casting technique are reported for the first time for high-performance piezoelectric nanogenerators (PNGs). The crystalline BTO NCs were synthesized via a simple low-temperature molten salt method. The piezoelectric output performance of the CF was investigated as a function of the weight ratio of the BTO NCs in the polymer matrix, electrical poling, constant mechanical loading, and low-frequency biomechanical energy harvesting. The composite PNG (CPNG) with 15 wt % of BTO NCs displayed an excellent peak-to-peak voltage ( V pp ) of 126.3 V and current density ( J ) of 77.6 μA/cm 2 and generated a maximum instantaneous areal power density of 7 mW/cm 2 at 100 MΩ at the low input mechanical pressure of 988.2 Pa. The generated output was sufficient to drive commercial light-emitting diodes and low-powered consumer electronic devices. Next, the CPNG was tested to harness waste biomechanical energy in our daily life; it generated a V pp of 29 V (human hand palm force) and 55.9 V (human foot stress). The proposed device was lightweight, flexible, eco-friendly, cost-effective, and a potential candidate to generate high electrical output at low mechanical pressure.
No takes yet. Share an insight, caveat, or question.
Alluri et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: