An aptamer screening method using a positive and negative selection units integrated microfluidic chip was introduced. Here, myoglobin (Myo), one of the early markers to increase after acute myocardial infarction, was used as the model. After 7-round selection, the aptamers, which exhibited dissociation constants (K(d)) in the nanomolar range (from 4.93 to 6.38 nM), were successfully obtained using a positive and negative selection units integrated microfluidic chip. The aptamer with the highest affinity (K(d) = 4.93 nM) was then used for the fabrication of a label-free supersandwich electrochemical biosensor for Myo detection based on target-induced aptamer displacement. The detection limit of this aptamer-based electrochemical biosensor was 10 pM, which was significantly lower than that of those previous antibody-based biosensors for Myo detection. This work may not only develop a strategy for screening aptamer but also offer promising alternatives to the traditional analytical and immunological methods for Myo detection.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2014) studied this question.