Answers are grounded in this paper and cite their sources.
• Dissipation boundaries are a novel P-wave scattering solution for bender element tests. • Dissipation boundaries avoid the pollution of the output signal with P-waves while leaving the S-wave signal intact. • Dissipation boundaries are designed using hybrid-Trefftz numerical models and 3D-printed. • Multiple designs are tested, their results validated, and their efficiencies compared. The bender element (BE) test is widely employed in geotechnical engineering for measuring the shear wave velocity ( V s ) and, consequently, the small-strain shear modulus ( G 0 ), due to its ease of application, integration into geotechnical devices, and effectiveness in real-world projects. However, signal distortion, primarily caused by shear and compression wave interference, remains a significant challenge, leading to unreliable measurements. This study, conducted as part of the CEN-DynaGeo and INTENT projects, introduces 3D-printed dissipation boundaries designed to mitigate compression wave interference and enhance signal clarity. Three dissipation boundary shapes including rings, spikes, and vertical strips were evaluated in a custom-designed vertical compression acrylic cell equipped with bender elements. The shapes were designed based on the numerical modeling of the BE experiment, conducted using the FreeHyTE software, which employs hybrid-Trefftz finite elements. Experimental results demonstrated that all dissipation boundaries effectively attenuated the compression wave peaks, with efficiencies depending on their shapes. Under vertical stress of 50 kPa and input frequency of 2 kHz in specimens with a void ratio of 0.85, compression wave peak reductions of 60 %, 46 %, and 19.9 % were observed for the ring, spike, and vertical strip boundaries, respectively. The proposed dissipation boundary technique offers a novel solution to improve the reliability of bender element testing in geotechnical applications.
No takes yet. Share an insight, caveat, or question.
Moldovan et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: