Answers are grounded in this paper and cite their sources.
Conformable and flexible tactile/pressure sensors are of interest in applications such as robotics, wearable, and interactive systems to measure the contact forces. These applications require a large number of robust sensors, for which simple manufacturing routes such as additive manufacturing can be useful. Herein, we present the fully 3-D printed capacitive touch sensors comprising of elastomeric foam-based soft dielectric layers (blends of polydimethylsiloxane (PDMS) and BaTiO3) and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) and silver nanowires (Ag NWs) composite-based electrodes. The devices were encapsulated with 3-D printed PDMS and tested under dynamic and static stimuli. The sensor with 1 wt.% of BaTiO3exhibited the best performance with a sensitivity of 0.571%·kPa⁻¹and excellent linearity (99.32%). The observed capacitive behavior of the sensor is significantly higher than a similar sensor with bulk PDMS as the dielectric. The fabrication approach employed in this work has the untapped potential to develop soft and flexible electronic skin (e-skin) for wearables, health monitoring, and rehabilitation.
No takes yet. Share an insight, caveat, or question.
Karagiorgis et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: