Answers are grounded in this paper and cite their sources.
Quick response and high sensitivity are equally important for the practical application of gas sensors. In this study, we introduced polyoxometalates (POMs) into a classical ternary metal oxide CuBi₂O₄ for the first time by convenient electrospinning and prepared a group of heater-type gas sensors by using CuBi₂O₄/PW₁₂ composite nanofibers. The sensor performances to formaldehyde gas were explored. The results proved that the gas-sensing response of the CuBi₂O₄/PW₁₂ (PW₁₂ = H₃PW₁₂O₄₀·xH₂O) composite sensor to 100 ppm formaldehyde gas was increased to 6.68, which was 3.92 times greater than the sensing capacity of the pure CuBi₂O₄ sensor. Simultaneously, the sensor exhibited a highly rapid response/recovery time of only 1/2 s, which is significantly faster than performances of CuBi₂O₄ gas sensors reported in the past literature. The cause of the improvement of the sensing performance was assessed via mechanism study, and it was found that the introduction of PW₁₂ into the sensor contributed to its enhanced performance. It was found that PW₁₂, as an electron acceptor, increased carrier mobility and reduced electron–hole recombination, thus contributing to enhanced gas-sensing properties. Moreover, other gas-sensing parameters such as selectivity, humidity resistance, repeatability, long-term stability were investigated. Hence, this study contributed to the literature on the development of polyoxometalates-based gas sensors.
No takes yet. Share an insight, caveat, or question.
Song et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: