Answers are grounded in this paper and cite their sources.
The steady, incompressible, isothermal, developing flow in a square-section curved duct with smooth walls has been investigated. The 40 × 40 mm duct had a radius ratio of 2·3 with long upstream and downstream straight ducts attached. Measurements of the longitudinal and radial components of mean velocity, and corresponding components of the Reynolds-stress tensor, were obtained with a laser-Doppler anemometer at a Reynolds number of 4 × 10 4 and in various cross-stream planes. The secondary mean velocities, driven mainly by the pressure field, attain values up to 28% of the bulk velocity and are largely responsible for the convection of Reynolds stresses in the cross-stream plane. Production of turbulent kinetic energy predominates close to the outer-radius wall and regions with negative contributions to the production exist. Thus, at a bend angle of 90° and near the inner-radius wall, uθuᵣ∂ Uθ/∂ r is positive and represents a negative contribution to the generation of turbulent kinetic energy. In spite of the complex mean flow and Reynolds stress distributions, the cross-stream flow is controlled mainly by the centrifugal force, radial pressure gradient imbalance. As a consequence, calculated mean velocity results obtained from the solution of elliptic differential equations in finite difference form and incorporating a two-equation turbulence model are not strongly dependent on the model; numerical errors are of greater importance.
No takes yet. Share an insight, caveat, or question.
Humphrey et al. (1981) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: