This is the authors' abstract. We don't add key points for this paper.
• A new design methodology for oxidation-resistant refractory alloys is proposed. • Al activity shows promise for predicting refractory oxidation performance. • Number-density topographic maps help screen large composition spaces. • The alloy Nb 12 Si 23 Ti 24 Al 36 Hf 5 is discovered and forms alumina scales up to 1400 °C. • The alloy Nb 12 Si 23 Ti 24 Al 36 Hf 5 is well CTE matched to Nb-based alloys. Refractory multi-principal element alloys (RMPEAs) promise to significantly enhance gas turbine engine efficiency, but their poor oxidation performance inhibits their implementation. Alumina-forming bond coat alloys can provide oxidation protection, but discovering suitable chemistries remains a challenge. We employed a design methodology that screens for alumina-formation capability using Al activity and phase constitution predictions from CalPhaD (Thermo-Calc). Alloy down-selection from approximately 7,800 alloys in the Nb-Si-Ti-Al-Hf system was conducted via analysis of calculated thermodynamic properties with number-density topology style maps. This approach is validated by creating and testing the composition Nb 12 Si 23 Ti 24 Al 36 Hf 5 , which forms protective alumina scales up to 1400 °C and resists pesting at 800 °C. Further, the alloy has an average coefficient of thermal expansion of ∼10.1 ppm/K, making it well matched to Nb-based refractory alloys. The methodology will be useful for the design of coatings for RMPEAs, enabling their implementation and significant efficiency benefits sooner.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Holgate et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: