Answers are grounded in this paper and cite their sources.
The adhesives for adhesively bonded joints at cryogenic environment should be enhanced by reinforcement with low coefficient of thermal expansion (CTE) and high fracture toughness because the materials become quite brittle at cryogenic temperature. Aramid fibers are noted for their low CTE and have been used to control the CTE of thermosetting resins. However, aramid composites exhibit poor adhesion between the fibers and the resin because the aramid fibers are chemically inert and contain insufficient functional groups. In this work, core–shell structured meta-aramid/epoxy nanofiber mats were fabricated by electrospinning with polymer blending method to improve the interfacial bonding between the adhesive and the fibers under cryogenic temperature. The CTE of the epoxy adhesives reinforced with modified nanofiber mats was measured, and the effect on the adhesion strength was investigated at single lap joints at cryogenic temperature. The fracture toughness of the adhesive joints was measured using a double cantilever beam (DCB) test.
No takes yet. Share an insight, caveat, or question.
Oh et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: