Answers are grounded in this paper and cite their sources.
Glass light guide plates (LGPs) are widely employed in ultrathin display applications due to their excellent optical transmittance, chemical stability, and mechanical strength. The fabrication of microholes with precisely controlled morphology on glass surfaces using ultrafast lasers is crucial for further enhancing the optical performance of LGPs. However, the interaction mechanisms between ultrafast lasers and glass have not yet been precisely described, and the insufficient consideration of inter-pulse interactions under high repetition frequency conditions leads to limited predictive accuracy for microhole morphology. Here, a rotary laser processing system is employed for the high-efficiency fabrication of glass LGPs. To address the moving multi-pulse laser irradiation scenario, an improved two-temperature model (TTM) incorporating the laser incubation effect is proposed, enabling the calculation of both the material temperature field and the evolution of microhole morphology during the moving multi-pulse laser processing. The model is experimentally validated using a rotational laser processing system, and the simulated results agree well with both single- and multi-pulse microhole ablation under various laser parameters. For LGP applications, a strategy is further proposed to obtain conical microholes suitable for LGP operation by controlling the pulse number at different processing speeds, thereby enhancing optical performance. This multi-pulse laser ablation model for glass provides important theoretical guidance for microhole fabrication in LGPs and demonstrates significant engineering application value.
No takes yet. Share an insight, caveat, or question.
Tang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: