Answers are grounded in this paper and cite their sources.
Polyamide (PA)-based ultrafiltration membranes offer low-cost and energy-efficient separation for wastewater treatment. In this study, nanocomposite PA membranes were synthesized using the non-solvent induced phase inversion (NIPS) technique with controlled thickness (200–400 µm) and incorporation of 0.1 wt.% titanium dioxide (TiO2), copper sulfide (CuS), and xanthan gum (XG) nanoparticles to enhance morphology, hydrophilicity, permeability, and mechanical strength. Nanofiller addition significantly improved the permeability–selectivity balance. The PA@TiO2 membrane exhibited the highest pure water flux of 250 ± 50 L/m2h, nearly ten times higher than pure PA (25 L/m2 h), due to enhanced porosity, improved pore interconnectivity, and Ti-OH functional groups that reduced water transport resistance. The PA@CuS membrane achieved superior BSA rejection of 85.23% compared to 71.89% for pure PA, along with a reduced contact angle of 33.13°, confirming enhanced hydrophilicity. PA@TiO2 also demonstrated 68% NaCl rejection and 56% dye rejection, with effective TSS, COD, and BOD removal in synthetic wastewater. Mechanical analysis showed significant reinforcement, with PA@XG exhibiting the highest tensile strength (3755 Pa). Overall, low nanoparticle loading and scalable NIPS fabrication produced durable, high-performance membranes suitable for sustainable ultrafiltration applications.
No takes yet. Share an insight, caveat, or question.
Ravichandran et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: