Answers are grounded in this paper and cite their sources.
Wall models for large-eddy simulation (LES) are a necessity to remove the prohibitive resolution requirements of near-wall turbulence in high Reynolds turbulent flows. Traditional wall models often rely on assumptions about the local state of the boundary layer (e.g., logarithmic velocity profiles) and require a priori prescription of tunable model coefficients. In the present study, a slip velocity boundary condition for the filtered velocity field is obtained from the derivation of the LES equations using a differential filter. A dynamic procedure for the local slip length is additionally formulated making the slip velocity wall model free of any a priori specified coefficients. The accuracy of the dynamic slip velocity wall model is tested in a series of turbulent channel flows at varying Reynolds numbers and in the LES of a National Advisory Committee for Aeronautics (NACA) 4412 airfoil at near-stall conditions. The wall-modeled simulations are able to accurately predict mean flow characteristics, including the formation of a trailing-edge separation bubble in NACA 4412 configuration. The validation cases demonstrate the effectiveness of this wall-modeling approach in both attached and separated flow regimes.
No takes yet. Share an insight, caveat, or question.
Bose et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: