Answers are grounded in this paper and cite their sources.
The solid state of a variety of urea-formaldehyde (UF) resins has been characterized by optical and scanning electron microscopy and wide angle x-ray diffraction studies. A first group of resins of various formaldehyde to urea mole ratios (F/U=1.0, 1.25, 1.5) and solids contents (25%, 45%, 65%) were prepared from oligomeric UF species and cured with NH4SO4 catalysts at room temperature for 120 days, and 90°C for 24 hours. Cured samples were dried by vacuum and elevated temperature (160°C). A second group of resins was also prepared by a more standard procedure to obtain F/U=1.2 and 1.6 and a solids content of 65%. These samples were cured at 160°C for 4 and 5 minutes with NH4C1 catalyst. The first group of samples showed colloidal character and definite crystallinity especially as F/U decreased to 1.0. The crystals appeared to have high melting points (Tm>230°C) and the formulation of the resin did not appear to vary the crystal structure but only the percent crystallinity. The water content of the cured resins strongly influenced the crystallinity with crystallinity increasing as water is removed. The effect of changing the water content appears to be reversible to a large extent. The second group of samples showed little crystallinity and no obvious colloidal character.
No takes yet. Share an insight, caveat, or question.
Stuligross et al. (1985) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: