Answers are grounded in this paper and cite their sources.
The surface of steel sheets used in the metal-forming process discussed in this article was textured by a laser-ablation technique. Differently shaped craters are formed in a patterned structure on the steel surface by controlling the pulsed-laser power density, pulse-repetition rate, and pulse duration. Lasertex sheets formed by this process have unique friction characteristics because of the uniform surface roughness and valley-biased topography. The friction of lasertex sheets was studied using a metal-forming bench test rig. Influencing factors, including surface roughness and sliding velocity, were studied under lubricated conditions. The friction of lasertex sheets was compared with that of shot-blasted sheets. The results showed that the coefficient of friction of the lasertex sheet under dry friction decreases with an increase in surface roughness and changes little with varying sliding velocity. With lubrication, the coefficient of friction of the lasertex sheet rises with an increase in surface roughness and decreases with an increase in sliding velocity. Lasertex sheets were found to have lower friction coefficients than shot-blasted sheets over the rage of surface roughness and sliding velocity investigated.
No takes yet. Share an insight, caveat, or question.
Barber et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: