Key result
The proposed TCBD-DDA circuit achieved a DC gain of 105 dB, slew rate of 111.6 V/ms, and power dissipation of 41.9 µW at a 0.5 V supply for bio-signal acquisition.
Why the study?
Designing floating input comparators for biomedical signal acquisition requires maintaining stability across temperature and obtaining accurate signal acquisition with minimal drift.
The proposed TCBD-DDA based floating input comparator provides high gain and low power dissipation suitable for bio-signal acquisition systems.
Answers are grounded in this paper and cite their sources.
May enable low-power bio-signal comparators in wearables; leaves open validation for cardiovascular monitoring.
This work presents an efficient design of an analog front-end circuit commonly used in biomedical applications, called a floating input comparator. In order to maintain stability across temperature and obtain accurate signal acquisition with minimal drift, this circuit makes use of a novel amplifier called TCBD-DDA (temperature compensated bulk driven differential difference amplifier). It is observed from theoretical analysis and various simulations that the proposed design successfully addresses the two major challenges, such as handling variations in gain with temperature and reducing fluctuations of bias current due to offset and non-linearity. All simulations have been carried out using the Cadence Virtuoso EDA tool with 180 nm CMOS technology parameters. The TCBD-DDA block offers a very high DC gain of 105 dB, an average slew rate of 111.6 V/ms, an input impedance of 75 MΩ, and a low output impedance of 88.8 Ω. The overall circuit needs a single supply of 0.5 V only and dissipates power of 41.9 µW. The proposed circuit qualifies for a bio-signal acquisition system where 1–5 mV signals at 0.1–150 Hz need to be sensed and amplified.
No takes yet. Share an insight, caveat, or question.
Chandra et al. (2026) studied this question. TCBD-DDA (temperature compensated bulk driven differential difference amplifier) was evaluated on Circuit performance metrics (DC gain, slew rate, impedance, power dissipation). The proposed TCBD-DDA circuit achieved a DC gain of 105 dB, slew rate of 111.6 V/ms, and power dissipation of 41.9 µW at a 0.5 V supply for bio-signal acquisition.
Synapse has enriched 10 related papers. Consider them for comparative context: