Answers are grounded in this paper and cite their sources.
Investigates ferroelectric and piezoelectric properties for IoT applications, suggesting effective integration strategies.
This thesis presents a systematic investigation of the ferroelectric and piezoelectric properties of layered hybrid halide perovskite (HHP) thin films to integrate the corresponding piezoelectric devices for self-powered Internet of Things (IoT) systems. Initial efforts focused on the optimization of layered halide perovskite of (BA)₂MAₙ₋₁PbₙBr₃ₙ₊₁ (n = 1 and 2) thin films fabricated in a metal/semiconductor/metal (M/S/M) ferroelectric device architecture, emphasizing its importance for integration with electronic devices. This investigation revealed the importance of additional barrier layers (PCBM and Cr/Cr₂O₃) for improving ferroelectric properties. This study further identifies the challenges in achieving phase pure (BA)₂FAₙ₋₁PbₙBr₃ₙ₊₁ (n = 2 to 5) and (PEA)₂MAₙ₋₁PbₙBr₃ₙ₊₁ (n = 1 to 4) HHP thin films deposited with blade coating technique under ambient conditions. The phase purity and polar properties were confirmed through X-ray diffraction, differential scanning calorimetry, UV-Visible, and Raman spectroscopy. The piezoelectric energy-harvesting capabilities of (BA)₂FAₙ₋₁PbₙBr₃ₙ₊₁ (n = 2 to 5) HHP thin films were systematically evaluated under human biological motion and dynamic linear forces. The piezoelectric power output of the (BA)₂FAPb₂Br₇ device improved by ~1.8× after PCBM‑based surface passivation. Additionally, light-induced and pyro-enhanced piezoelectric responses were identified in (BA)₂FAₙ₋₁PbₙBr₃ₙ₊₁ (n = 2 to 5) thin films. The ferroelectric switchable polarisation in HHP thin films was confirmed using PUND analysis. The ferroelectric behaviour of aromatic spacer (PEA)₂MAₙ₋₁PbₙBr₃ₙ₊₁ (n = 1 to 4) HHP thin films was examined as a function of processing temperatures. Room-temperature-processed (PEA)₂MAₙ₋₁PbₙBr₃ₙ₊₁ (n = 2) thin films demonstrated the highest saturation polarization of 9.8 µC cm⁻² at 1 Hz, along with a pyroelectric coefficient of 1.7 µC m⁻² K⁻¹. Overall, this thesis work reveals that the ferroelectric, pyroelectric, and piezoelectric properties of these layered HHP thin films are fundamentally determined by the choice of spacer (A’) and small A cation (BA, MA, FA, and PEA) and the number of inorganic layers (n).
No takes yet. Share an insight, caveat, or question.
Raja Sekhar Muddam (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: