Answers are grounded in this paper and cite their sources.
A series of PIM-1/POSS microfibrous membranes were fabricated by electrospinning technology. The addition of POSS particles could greatly enhance the hydrophobicity, and a superhydrophobic–superoleophilic membrane was obtained as the POSS concentration increased to 40 wt %. The scanning electron microscopy images indicate that the incorporation of POSS particles results in formations of hierarchical structures on the surface of the PIM-1/POSS fibers. Both the intrinsic hydrophobic nature of POSS and the increase in the fiber surface roughness led to the superhydrophobicity and superoleophilicity. The 40 wt % PIM-1/POSS fibrous membrane could not only separate a wide range of immiscible oil–water mixtures with efficiencies higher than 99.95% but also separate water-in-oil emulsions with efficiencies higher than 99.97%. Furthermore, because of the ultrahigh intrinsic microporosity of the PIM-1 polymer, the PIM-1 fibrous membrane exhibited the ability to adsorb a large amount of contaminants such as oil red O and solvent blue 35 from oils. Therefore, these membranes are multifunctional and can be applied to treating immiscible water–oil mixtures, water-in-oil emulsions, and cleanup of oil soluble contaminants.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: