Answers are grounded in this paper and cite their sources.
We report on the annealing effects on strontium ruthenate thin films deposited on SrTiO 3 using liquid‐delivery metalorganic chemical vapor deposition (MOCVD). The results of high resolution X‐ray diffraction (HR‐XRD), Raman spectroscopy, atomic force microscopy (AFM), and electrical resistivity, before and after a post‐growth annealing process were analyzed and compared. XRD and Raman spectroscopy for the as‐deposited film revealed that the film had c ‐axis orientation and contained RuO 2 as secondary phase. Single phase SrRuO 3 could be obtained by annealing the film at 700 °C. Annealing at higher temperatures up to 850 °C leads to ruthenium deficiency, which is revealed by an increase in the out‐of‐plane lattice parameter, while at even higher annealing temperatures a decrease in the out‐of‐plane lattice parameter was detected might be due to diffusion of Ti from the substrate. The electrical resistivity increased with increasing annealing temperature up to 950 °C and showed typical metallic temperature dependence, while for the film annealed at 1000 °C a semiconductor‐like behavior was observed.
No takes yet. Share an insight, caveat, or question.
Anooz et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: